-
Day or night, wet or dry, RainLine is the brightest wet reflective pavement-marking stripe
available.
-
As profiles are pressed into the hot thermoplastic, the glass beads reach their ideal embedment.
-
The RainLine System opens the roadway to traffic more quickly than most other striping systems.
-
RainLine's inverted profile produces a rumbling noise when driven over, alerting motorists that they have driven out of their lane.
-
RainLine's water channels drain water from the driving surface of the roadway minimizing hydroplaning of vehicles.
-
RainLine's water channels allow rain to rapidly drain from the road and produce a stripe that remains visible in the worst conditions, such as heavy rainfall at night.
-
RainLine all weather pavement markings are renewable by simply re-coating with spray thermoplastic or traffic paint, or another coat of
RainLine.
-
RainLine is recommended for both concrete and asphalt pavements.
-
RainLine profiles produce a flat-top line that will not compress under heavy traffic and the vertical face reflectors are protected from traffic abuse.
-
RainLine is typically installed at 160 mils (4mm) above the plane of the road, which means you could receive as many as 8 to 10 years of a maintenance free, all weather high performance marking system.
-
Proper installation procedures produce initial RainLine Mirolux 12 reflectance readings of 450 to 800 mcd for white markings and 350 to 700 mcd for yellow markings.
-
The RainLine kit is easily adapted to most motorized thermoplastic striping equipment, allowing an application rate of 3 to 5 miles per hour.
